Universal Protractor No. 93

With Fine Adjustment

• Parallax-error correction (vernier and scale are on one level, which largely eliminates reading errors)
• Nonglare reading
• Stainless steel
• Hardened measuring edges
• Panorama magnifier
• Additional square
• Packed in case

The measuring arm can be replaced and adjusted over its entire length.

 

Dial graduation	°	4 x 90°
Readingiaccuracy		1/12° = 5 arc minutes
Arm length	mm	150 / 200 / 300
Net weight	kg	0.380
Order number		931106
Spareiarmi150imm	Order no.:	930001
Spareiarmi200imm	Order no.:	930002
Spare arm 300 mm	Order no.:	930003

 

Universal Protractor No. 119

High-Precision Design with Fine Adjustment

• Parallax-error correction (vernier and scale are on one level, which largely eliminates reading errors)
• Nonglare reading
• Stainless steel
• Hardened measuring edges
• Panorama magnifier
• Packed in wooden case

The measuring arm can be replaced and adjusted over its entire length.

 

Dial graduation	°	4 x 90°
Readingiaccuracy		1/12° = 5 arc minutes
Size		1	2	3	4
Arm length	mm	150	200	300	500
Net weight	kg	0.265	0.270	0.280	0.300
Order number		1191101	1191102	1191103	1191104
Spare arms	Order no.:	1190001	1190002	1190003	1190004
Wooden case	Order no.:	1195301	1195302	1195303	1195304

Digital Universal Protractor No. 120

With Electronic Angle Measurement

Electronic angle measurement and digital display ensure very high accuracy and reliable readings.

• Baseplate and measuring arms made of stainless steel
• Hardened measuring edges
• Fine adjustment
• Quick clamping of the measuring arm
• Simple adjustment or zero setting on any flat surface
• Packed in case

Reading:

• 1 arc minute / 0.01 angular degrees
• Mode switch allows reading both in decimal degrees and arc minutes
• Large LCD display (8.5 mm)
• Accuracy: ± 2 arc minutes
• Printer or EDP connection via "RS 232" interface
• Measurement ranges: 1 x 360°, 2 x 180°, or 4 x 90°
• Zero setting (RESET) possible in any position
• Power supply: 1 lithium coin cell battery 3 V
   

 

Size		1	2	3	4
Arm length	mm	150	200	300	500
Net weight	kg	0.370	0.375	0.380	0.390
Orderinumber		1201101	1201102	1201103	12011014
Spare arms	Order no.	12047101	12047102	12047103	12047104

 

Conncetion cable for printer and measured value printer on request.

Digital Universal Protractor No. 1201106

With Electronic Angle Measurement

Electronic angle measurement and digital display ensure very high accuracy and reliable readings.

• Baseplate and measuring arms made of stainless steel
• Packed in sturdy aluminum case

Accessories:

• Reference square 60 x 50 mm for adjustment, zero setting, and presetting measured values
• 1 clampable additional square (90°) for measuring the smallest angles
• 2 measuring arms (150 + 300 mm) 

Reading:

• Large LCD display with 2-line display
• At the top, the measured value appears in angular degrees with decimal places
• At the bottom, the measured value appears in degrees / arc minutes / arc seconds
• Device accuracy: +/- 5 arc minutes
• Tested and calibrated: +/- 2 arc minutes
• Data output: RS 232
• Selectable measurement ranges: 0-360°, 0-180°, 0-90°
• Power supply: 3 V lithium, type CR 2032

 

Arm length	mm	150 + 300	150	300
Net weight	kg	0.350
Order number		1201106
Spare arms	Orderino.		12047105	12047106

V-Block-Base

• V-shaped bottom
• Finely ground on all sides
• For vertically clamping the universal protractor for measurements on the reference plane

 

V-block base foriprotractorino.	119	120
Order number	1231001	1231002

Acute-Angle Attachment

• Special accessory for universal protractors
• To be placed on the measuring edge of the protractor
• For measuring the smallest angles from 0°

Lengthimeasuringiarm	mm	75
Order number		1221000